Solid Carbide Roughing Spiral tools are designed for fast feed rates on CNC routers when the surface finish is not important on materials such as plywood's and hardwoods.

The Rougher Spiral tool will cut a rippled effect on the material while producing small chips; making it an extremely quiet and smooth cut even at high feed rates and heavy cuts.
A Solid Carbide Finishing Spiral tool could be used as a second operation to smooth the cut edge.

Feed rates range from 5-24m/min
With MAX speed of 24,000 RPM
Ensure chip load is not less than 0.125mm per flute.

Why Use Solid Carbide Tooling

Because of some unique cutting tool properties.  Solid carbide spiral tools produce the best edge qualities of any cutting tool design available. Additionally solid carbide router tooling produce great edge qualities at the fastest feed rates possible with any type of routing tools.

3 Flute  Solid Carbide Roughing Spiral tools are designed for fast feed rates on CNC routers when the surface finish is not important on materials such as plywood's and hardwoods.

The Down shear cutting action reduces splintering on the top surface of the material and helps movement of smaller components on the CNC table.

Feed rates range from 5-24m/min
With MAX speed of 24,000 RPM
Ensure chip load is not less than 0.125mm per flute.

We hold a range of Solid Carbide Roughing tools as stock, however, we are able to  manufacturer these tools to any specification.