Solid Carbide Chip Breaker Spiral Tools are designed to break the cut chips into smaller pieces.  This reduces both vibration and power consumption.
Allowing for faster speeds on all materials for a finer finish, although visual lines maybe seen in some situations.

The Solid Carbide Chip Breaker slots are staggered on each flute to leave a smooth finish; although the work piece must be securely clamped.

Recommended for plywoods, hardwoods and dense materials that require higher feed rates.

Choose a Downcut for better clamping when machining small work pieces and improved finish on the top of the board.

Feed rates range from 10-20M/min
with MAX speeds of 14,000-24,000 RPM

Why Use Solid Carbide Tooling

Because of some unique cutting tool properties.  Solid carbide spiral tools produce the best edge qualities of any cutting tool design available. Additionally solid carbide router tooling produce great edge qualities at the fastest feed rates possible with any type of routing tools.

3 Flute Solid Carbide Chip breaker Spiral Tools are designed to break the cut chips into smaller pieces, reducing vibration and power  consumption.
This allows for even faster speeds on all materials for a finer finish, although visual lines maybe seen in some situations.

Available as both Upcut and Downcut, two flute and three flute.

Feed rates range from 10-25M/min
with MAX speeds of 14,000-24,000 RPM

We hold a range of Solid Carbide Chip Breaker tools as stock, however, we are able to  manufacturer these tools to any specification.